Contact for queries :
020 3900 4072

Throughout this course I will be using the 2018 metric version in conjunction with the UK component library. If you are using the Imperial version and / or a different regional library, don’t worry. All the steps and process will be the same.

As with BIM you work solely on one single project, so I have constructed this course in the same manner. We will be modelling one single project throughout the course.

If you do not have previous experience with Revit or any CAD-based software, don’t worry. I will start off from the beginning building you up to be more than capable at creating your own Revit models.

The course will start off with the basics; from the terminology which Revit uses to the tools and interface.

We will then begin to build on our project, introducing a new tool and feature as we progress.

Adding in the datum elements; such as the levels and grids.

Structural components; such as the Structural and Architectural columns

Major and Minor Components like the; walls, windows, doors, floors, stairs, ceilings, curtain walls and roofs.

We will then take it to the next level and learn how to create 2D details, how to tag the components, create schedules & legends, creating render images and video walk-throughs.

Finally, we will set up our sheets and send it to print.

Alongside the videos, I have supplied you with course notes to follow along with as well as some files to work with.

When we complete this course you will have the skills and knowledge to take a project from start to finish using the tools and library provided by Autodesk.

So let’s get started!

What you’ll learn

  • When you complete this course you will have the skills and knowledge to take a project from start to finish using the tools and library provided by Autodesk.

Requirements

  • Students should have a good working knowledge of how to use a PC
  • Previous experience on a CAD program is not essential but will benefit the student
  • Revit 2018/19 installed, 30-day trial available from Autodesk
  • Revit is not supported on MAC, you will have to Bootcamp your MAC and install Windows to run Revit
  • Course notes and files will be provided
  • A second screen is recommended to view the videos while using Revit on the other

Course Curriculum

Touring the Interface
1.1 The Start Screen 00:02:00
1.2 File Tab, Quick Access, Info Centre 00:04:00
1.3 Tabs, Ribbons and Panels 00:01:00
1.4 Properties Palette and Project Browser 00:03:00
1.5 Status Bar, View Controls, Selection Toggles and Context Menu 00:08:00
1.6 Navigating the Drawing Area 00:03:00
1.7 Contextual Tab 00:02:00
1.8 Terminology 00:03:00
Introduction to Walls
2.1 Introduction to Walls and Wall Panel 00:11:00
2.2 Wall Options Bar 00:11:00
2.3 Wall Properties palette 00:03:00
Basic Tools
3.1 Align, Offset, Mirror 00:04:00
3.2 Move, Copy, Rotate, Trim Extend 00:07:00
3.3 Split element, Pin, Array, Scale, Delete 00:07:00
Datum Elements
4.1 Building Levels 00:13:00
4.2 Grid System 00:06:00
Major Components
5.1 Structural Column 00:05:00
5.2 Architectural Columns 00:03:00
5.3 Placing External Walls 00:04:00
5.4 Placing Internal Walls 00:06:00
5.5 Using the Equality Constraints 00:07:00
5.6 Placing the Ground Floor Slab 00:06:00
5.7 Placing a boundary footpath 00:03:00
Minor Components
6.1 Placing Doors from the Type Selector 00:05:00
6.2 Loading Doors from the Library 00:02:00
6.3 Creating a new Door Type 00:05:00
6.4 Adding a Wall Opening 00:07:00
6.5 Editing the Walls Profile to create an opening 00:02:00
6.6 Adding a Structural Opening to the wall 00:03:00
6.7 Placing Windows 00:04:00
Creating the next level
7.1 Increasing Top Constraint 00:04:00
7.2 Placing the First Floor slab 00:05:00
7.3 Adding a Shaft Opening to the slab 00:03:00
7.4 Selection Filter and Aligned to Selected Levels 00:07:00
Vertical Circulation
8.1 Stair by Component 00:06:00
8.2 Stair by Sketch 00:04:00
8.3 Creating project stair 00:07:00
8.4 Placing a Railing 00:02:00
8.5 Creating a Railing 00:07:00
Roof Component
9.1 Introduction to roofs by Footprint 00:12:00
9.2 Pitched roof by Footprint 00:05:00
9.3 Flat roof by Footprint 00:04:00
9.4 Roof by Extrusion 00:03:00
Curtain Walls
10.1 Introduction to Curtain walls 00:06:00
10.2 Constructing a Curtain wall 00:04:00
10.3 Curtain Wall Entrance 00:10:00
10.4 Curtain Wall Rear 00:05:00
10.5 Curtain wall front 00:03:00
Reflected Ceiling Plan
11.1 Introduction to Reflected Ceilings 00:06:00
11.2 Adjusting the Ceiling position 00:01:00
11.3 Creating the First Floor Ceiling Plan 00:02:00
11.4 Adding Components to the Ceiling 00:07:00
11.5 Example of Rendered ceiling components 00:02:00
Creating a 2D Detail (Callout)
12.1 Setting up a Callout 00:04:00
12.2 Masking and Filled Regions 00:02:00
12.3 Detail Components and Repeating Detail Components 00:07:00
12.4 Placing Insulation 00:01:00
12.5 Using the Detail Line and Creating a Line Style 00:03:00
12.6 Adding Text with Leaders 00:04:00
12.7 Adding Break Lines 00:01:00
Dimensions
13.1 Introduction to Dimensions by Individual References 00:04:00
13.2 Dimension by Entire Wall 00:02:00
13.3 Witness Lines 00:01:00
13.4 Modifying a Dimension 00:01:00
Tags, Schedules & Legends
14.1 Introduction to Tags 00:04:00
14.2 Adding information to the Tags 00:05:00
14.3 Placing Window Tags 00:05:00
14.4 Placing Wall Tags 00:02:00
14.5 Applying Tags to First Floor 00:02:00
14.6 Creating a Room and Placing Room Tags 00:09:00
14.7 Creating a Room Legend 00:03:00
14.8 Creating a Room Schedule 00:05:00
14.9 Creating a Door Schedule 00:11:00
14.10 Creating a Window Schedule 00:03:00
14.11 Creating a Door and Window Legend 00:10:00
Visualisations
15.1 Introduction to Shadows and Sun settings 00:04:00
15.2 Creating a One-Day Solar Study 00:03:00
15.3 Introduction to Rendering and Rendering first image 00:13:00
15.4 Rendering second image 00:07:00
15.5 Introduction to Walkthroughs 00:06:00
15.6 Modifying a Walkthrough 00:02:00
15.7 Creating a Walkthrough over two levels 00:06:00
Create Sheets & Print
16.1 Opening a Sheet and overview of the Title-block 00:02:00
16.2 Setting up a Sheet part 1 00:09:00
16.3 Setting up a Sheet part 2 00:09:00
16.4 Adding Render views and Callouts to Sheet 00:02:00
16.5 Loading an A2 Title-block 00:03:00
16.6 Duplicating views 00:03:00
16.7 Page Setup and Printing 00:03:00

Course Reviews

4.8

4.8
1 ratings
  • 5 stars0
  • 4 stars0
  • 3 stars0
  • 2 stars0
  • 1 stars0

No Reviews found for this course.

TAKE THIS COURSE
  • £315.00 £18.00
  • UNLIMITED ACCESS
  • Course Certificate
  • Number of Units89
  • Number of Quizzes0
  • 7 hours, 6 minutes
  • CPD Accredited
  • Gift this course

Instructors

1 STUDENTS ENROLLED

    Our Students Say..

    Google Rating
    5.0